How to Properly Use Aerial Repeaters



Pre-Show Setup
  • Set up your repeaters on a hard flat, level surface.

  • Make sure you have a clear , open space to shoot with 150 ft. distance between your launch site and the audience or inhabited buildings.

  • Have a hose, fire extinguisher, or water supply at hand for emergencies.

  • Be sure you stabilize your repeater with bricks.

  • Make sure all fuses are covered until ready to use.


Using Aerial Repeaters
  • Be sure to wear Safety Glasses and Safety Gloves when lighting.

  • Use a Phantom Pyro Torch, punk or extended lighter to light.

  • Use a flashlight at night so you can see the fuse.

  • After you light the fuse move a minimum of 20 feet from the repeater.

  • Never re-use a repeater that fails to light the first time, use a hose or other water source to soak the repeater and safety dispose of the repeater outdoors.

  • Do not use with Alcohol.

  • Never attempt to take a repeater apart.

  • Never put your head or any part of your body over a repeater.